Description
This wiper linkage covers the Toyota Hilux (2004-2015) and replaces OE 85150-0K061. Same footprint as the original part, with the pivot design reworked where the factory unit tends to fail.
On a high-mileage vehicle the linkage outlives the bushings inside it. Once a pivot stiffens, every sweep pulls harder on the motor, and the wiper arm timing drifts out of position.
Vehicles this wiper linkage fits
| Make / model | Model years |
|---|---|
| Toyota Hilux | – |
Replaces OE number: 85150-0K061. If the number on your old linkage matches, this is the correct replacement.
Hilux 2004-2015: the hardest-working linkage we supply
The seventh-generation Hilux is a works vehicle in the truest sense — mine sites, farms, safari fleets — and its wiper linkage fails from duty, not from age. Dust is the killer: the cab-over-forward cowl collects grit that works into the pivots on every wash.
- Dust duty. Mine-site and farm trucks can wear a linkage in two or three seasons.
- Bonnet-mounted cowl exposure. The Hilux cowl sits open to the elements; grit does not need a broken seal to get in.
- Vibration loosens everything. Check bracket bolts and bulkhead threads each time the assembly is out.
- Motor reused. Rods, pivots and bracket supplied; the crank transfers from the original motor.
Checks before ordering
| Check | What to look for |
|---|---|
| OE number | 85150-0K061 on the old assembly — also 851500K061 |
| Generation | 2004-2015 Vigo/An. Confirm the cab generation — the range is long |
| Duty history | Mine and farm trucks: inspect pivots for embedded grit |
| Arm marks | Tape both arms; the new assembly has no timing marks |
Why the original part fails
Uneven wiping, a blade that lags on one side, or a knock on every pass usually traces back to worn pivots rather than the motor. If the linkage is left in place, the extra load is passed on to the motor and gearbox.
- POM bushings, DuPont grade — The original soft bushings wear oval and let the pivot move off-centre. A harder, dimensionally stable bushing keeps the clearance the linkage was designed with.
- Brass bearings at the pivot pins — Carries the load at the point where the factory part scores, so service life is not limited by a single wear surface.
- Aluminium pivot arms — Adds stiffness to the linkage under load — this is what stops the assembly flexing and skipping.
- Galvanised and coated steel — Water from the windscreen drains straight over this area. Coated rods and brackets resist rust and seizing in wet climates.
- Pre-greased on assembly — The unit goes in ready to run, so there is no extra greasing step during fitting.
Specification
| OE number | 85150-0K061 |
|---|---|
| Vehicle | Toyota Hilux (2004-2015) |
| Bushings | POM (DuPont grade) with brass bearings |
| Pivot arms | Aluminium, re-engineered design |
| Finish | Galvanised and coated, anti-rust |
| Mounting | Direct bolt-on to original points |
| Greasing | Pre-greased at assembly |
| Testing | 100% inspected before shipment |
| Packing | Neutral carton or customer-branded |
| Warranty | 12 months |
Symptom to cause
| Symptom on the car | What is worn | Does this part fix it? |
|---|---|---|
| Gritty grinding sweep | Dust in the pivot bearings | Yes |
| Arms out of step | Oval bush | Yes |
| Wipers stall at idle | Seized joints loading the motor | Yes, motor permitting |
| Streaks only | Blades | No |
Service outline
- Battery off; arms tape-marked.
- Arm nuts and caps off; arms pulled with a puller.
- Cowl panel removed; blow out the wiper well and clear drains.
- Bracket unbolted; assembly out; crank transferred.
- New assembly seated; bracket bolts tightened with threadlocker for vibration duty.
- Arms to the marks; cycle run; park corrected if needed.
Full procedure: how to replace a wiper linkage on your car.
Frequently asked questions
Do you cover other models from the same platform?
Very often yes — several vehicles share the same linkage. If you tell us the models you buy for, we will check the full cross-reference and bundle them into one shipment.
How do I confirm this Toyota Hilux linkage is the right part?
Match the OE reference 85150-0K061 against the number stamped or printed on your original linkage. If your part carries a superseded number, send us a photo of it and we will confirm the match before you order.
Is the wiper motor included in this listing?
This listing covers the linkage itself. Several of our linkages are also available as a linkage-with-motor assembly — tell us the vehicle and we will quote both options.
Can we stock these for a mine-site fleet?
Yes — Hilux linkages are a steady volume line for us. Order by OE number per season; we consolidate into containers with your other Toyota references.
Threadlocker on the bracket bolts?
On vibration duty, yes. Standard assembly bolts arrive prepared for it; follow your fleet’s fastener practice.
Request a quote
Send us the OE number, the quantity you need and your destination port, and we will come back with price, MOQ and lead time. If you are sourcing a range of wiper linkages rather than a single part, ask for our full cross-reference list — we cover VW, Audi, Seat, Skoda, Ford, Toyota, Honda, Hyundai, Nissan and Opel applications.
Factory-direct, built for duty — see fleet and distributor terms. For the mechanism: how a wiper linkage works.
Related wiper linkages and vehicle series
This Toyota Hilux 2004-2015 assembly is part of our Toyota Series wiper linkages range. Also stocked in the same series: Toyota Tacoma 1996-2004 wiper linkage (85150-04020) and Toyota Paseo 1996-1999 wiper linkage (85150-16520). For fitment guidance and fault diagnosis, see how a wiper linkage works. Every assembly ships with its OE cross-reference, so you can order by the number stamped on the old unit.








Reviews
There are no reviews yet.