85160-12790 Wiper Linkage for Toyota Corolla 1993-1997

Brand-new OE-quality wiper linkage assembly for Toyota Corolla 1993-1997 (replaces OE 85160-12790). Supplied complete with links, pivots and crank arm, and it bolts onto the factory mounting points using the original wiper motor. Factory-direct wholesale supply for importers and distributors — MOQ 10 pcs.

Description

Direct-fit wiper linkage for the Toyota Corolla (1993-1997), replacing OE 85160-12790, 85150-12791. The assembly arrives pre-greased and aligned, so fitting is a straightforward remove-and-refit job.

The failure mode is predictable — a binding pivot, a rusty rod end or cracked plastic bushing. Replacing the whole assembly is normally quicker and safer than pressing in new bushings on a scored pin.

Vehicles this wiper linkage fits

Make / model Model years
Toyota Corolla 1993-1997
Geo Prizm 1993-1997

Replaces OE numbers: 85160-12790, 85150-12791. If the number on your old linkage matches, this is the correct replacement.

Corolla E100 (1993-1997): keeping a classic moving

The E100 Corolla is still daily transport in many markets, and this linkage is exactly the kind of reference big suppliers drop — but taxis, rural fleets and enthusiasts still need it. We manufacture it now, which matters: old-stock linkages from the 1990s have hardened bushes that fail within months.

  • Current-production bushes. Our bushings are new-material specification, not 1990s shelf stock.
  • Thirty-year-old fixings. Expect seized arm nuts and brittle cowl clips; plan the puller and clips before starting.
  • Simple, robust layout. The E100 linkage is easy to fit — the difficulty is all in the disassembly of aged parts.
  • Motor reused. Rods, pivots and bracket supplied; crank transfers from the original motor.

Confirm before ordering

Check What to look for
OE number 85160-12790 on the old assembly — also 8516012790
Generation 1993-1997 E100. Later Corollas take different references
Aged fixings Soak arm nuts and bracket bolts before removal
Arm marks Tape both arms; the new unit has no timing marks

Why the original part fails

Most failures on this type of assembly start at the pivots: the bushings dry out, water works into the joint and the pin starts to seize. The symptom shows up first as a smeared arc at the edge of the screen.

  • POM bushings, DuPont grade — The original soft bushings wear oval and let the pivot move off-centre. A harder, dimensionally stable bushing keeps the clearance the linkage was designed with.
  • Brass bearings at the pivot pins — Carries the load at the point where the factory part scores, so service life is not limited by a single wear surface.
  • Aluminium pivot arms — Adds stiffness to the linkage under load — this is what stops the assembly flexing and skipping.
  • Galvanised and coated steel — Water from the windscreen drains straight over this area. Coated rods and brackets resist rust and seizing in wet climates.
  • Pre-greased on assembly — The unit goes in ready to run, so there is no extra greasing step during fitting.

Specification

OE number 85160-12790, 85150-12791
Vehicle Toyota Corolla (1993-1997)
Bushings POM (DuPont grade) with brass bearings
Pivot arms Aluminium, re-engineered design
Finish Galvanised and coated, anti-rust
Mounting Direct bolt-on to original points
Greasing Pre-greased at assembly
Testing 100% inspected before shipment
Packing Neutral carton or customer-branded
Warranty 12 months

What this assembly fixes

Symptom on the car What is worn Does this part fix it?
Arms sweep unevenly Hardened or oval bushes Yes
Knock per stroke Pin play Yes
Motor strains Seized joints Yes
Poor wipe quality only Blades or arms No

Fitting outline

  1. Battery off; arms tape-marked.
  2. Soak and remove the arm nuts; pull the arms gently.
  3. Cowl clips released carefully — they are thirty years old.
  4. Bracket unbolted; assembly out; crank transferred.
  5. New assembly fitted; bracket bolts evened.
  6. Arms to the marks; cycle tested; park corrected.

Full procedure: how to replace a wiper linkage on your car.

Frequently asked questions

Can you supply this in bulk for distribution?

Yes. This is a volume part for the aftermarket and we supply importers, distributors and workshop chains with mixed container loads. Urgent orders are accepted and samples can be arranged.

What is the usual lead time?

Lead time depends on quantity and whether you need neutral or branded packing. Send us the quantity and your destination port and we will confirm the schedule in the quotation.

Do you cover other models from the same platform?

Very often yes — several vehicles share the same linkage. If you tell us the models you buy for, we will check the full cross-reference and bundle them into one shipment.

Is this new production or old stock?

New production on our current line. That is the point of keeping the reference: current-specification bushings behave better than any 1990s shelf stock.

Minimum order on a low-volume classic?

10 pieces per part number, the same as every reference. Classic-era Corolla links are usually ordered alongside other Toyota references in a mixed container.

Request a quote

Send us the OE number, the quantity you need and your destination port, and we will come back with price, MOQ and lead time. If you are sourcing a range of wiper linkages rather than a single part, ask for our full cross-reference list — we cover VW, Audi, Seat, Skoda, Ford, Toyota, Honda, Hyundai, Nissan and Opel applications.

Manufactured now, on our own line — see wholesale terms. Mechanism background: how a wiper linkage works.

Related wiper linkages and vehicle series

This Toyota Corolla 1993-1997 assembly is part of our Toyota Series wiper linkages range. Also stocked in the same series: Toyota Tacoma 1996-2004 wiper linkage (85150-04020) and Toyota Paseo 1996-1999 wiper linkage (85150-16520). For fitment guidance and fault diagnosis, see how a wiper linkage works. Every assembly ships with its OE cross-reference, so you can order by the number stamped on the old unit.

Additional information

Position

Front

Material

Aluminium + POM bushings

Warranty:

12 months

Minimum Order Quantity:

10 pcs

Packaging Details:

Carton of 10-20 pcs depending on size

Delivery Time:

7-30 days

Payment Terms:

T/T 30% deposit, balance before shipment

Place of Origin:

Made in China

Model Number:

602-426, 85150-12791, 8515012791, 85160-12790, 8516012790

Reviews

There are no reviews yet.

Be the first to review “85160-12790 Wiper Linkage for Toyota Corolla 1993-1997”

Your email address will not be published. Required fields are marked *

nine + 10 =

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@fengteautoparts.com”.