Description
This wiper linkage is a direct bolt-on replacement for the VW Lavida. It carries OE reference 19D955023A and mounts to the original fixing points, so no drilling or adapter plates are needed.
Uneven wiping, a blade that lags on one side, or a knock on every pass usually traces back to worn pivots rather than the motor. If the linkage is left in place, the extra load is passed on to the motor and gearbox.
Vehicles this wiper linkage fits
| Make / model | Model years |
|---|---|
| VW Lavida | – |
Replaces OE number: 19D955023A. If the number on your old linkage matches, this is the correct replacement.
Lavida 2018 (China market): high-volume sedan, current reference
The Lavida is one of the highest-volume sedans in China, and used examples now export worldwide. Its linkage is a modern compact assembly; failures track the MQB-era pattern — water and impact rather than cycle wear.
- Exported used cars. Confirm the market of origin; LHD applies to this reference.
- MQB-family failure pattern. Keep jet-washers off the cowl; clear the drains.
- Current production. The car is current in its home market — stable stock for repeat orders.
- Motor and crank reused. Rods, pivots and bracket supplied complete.
Ordering checks
| Check | What to look for |
|---|---|
| OE number | 19D955023A on the old assembly — match the A suffix |
| Model | Lavida 2018-on (China market). Confirm with the stamping on used imports |
| Drive side | LHD reference — confirm your market’s requirement |
| Arm marks | Tape both arms at park before removal |
Why the original part fails
On a high-mileage vehicle the linkage outlives the bushings inside it. Once a pivot stiffens, every sweep pulls harder on the motor, and the wiper arm timing drifts out of position.
- POM bushings, DuPont grade — The original soft bushings wear oval and let the pivot move off-centre. A harder, dimensionally stable bushing keeps the clearance the linkage was designed with.
- Brass bearings at the pivot pins — Carries the load at the point where the factory part scores, so service life is not limited by a single wear surface.
- Aluminium pivot arms — Adds stiffness to the linkage under load — this is what stops the assembly flexing and skipping.
- Galvanised and coated steel — Water from the windscreen drains straight over this area. Coated rods and brackets resist rust and seizing in wet climates.
- Pre-greased on assembly — The unit goes in ready to run, so there is no extra greasing step during fitting.
Specification
| OE number | 19D955023A |
|---|---|
| Vehicle | VW Lavida |
| Bushings | POM (DuPont grade) with brass bearings |
| Pivot arms | Aluminium, re-engineered design |
| Finish | Galvanised and coated, anti-rust |
| Mounting | Direct bolt-on to original points |
| Greasing | Pre-greased at assembly |
| Testing | 100% inspected before shipment |
| Packing | Neutral carton or customer-branded |
| Warranty | 12 months |
What this assembly resolves
| Symptom on the car | What is worn | Does this part fix it? |
|---|---|---|
| Heavy sweep after rain | Water-seized pivots | Yes |
| Arm lag on one side | Oval bush | Yes |
| Knock per reversal | Pin play | Yes |
| Uneven wipe only | Blades | No |
Fitting outline
- Battery off; arms tape-marked.
- Arm caps and nuts off; arms drawn with a puller.
- Cowl panel removed; drains checked.
- Bracket unbolted; assembly out; crank transferred.
- New assembly seated; bracket bolts evened.
- Arms to the marks; cycle tested; park corrected if needed.
Detail and photographs: how to replace a wiper linkage on your car.
Frequently asked questions
What is the usual lead time?
Lead time depends on quantity and whether you need neutral or branded packing. Send us the quantity and your destination port and we will confirm the schedule in the quotation.
Do you cover other models from the same platform?
Very often yes — several vehicles share the same linkage. If you tell us the models you buy for, we will check the full cross-reference and bundle them into one shipment.
How do I confirm this VW Lavida linkage is the right part?
Match the OE reference 19D955023A against the number stamped or printed on your original linkage. If your part carries a superseded number, send us a photo of it and we will confirm the match before you order.
How do I verify a used-import Lavida’s reference?
Read the stamping on the old linkage — 19D955023A for this generation. If it is illegible, send photos and the vehicle plate details; we match from our catalogue.
Is Lavida volume enough for stock programs?
Yes — it is one of the highest-volume sedans in its home market, and we hold continuous production for distributor stock programs.
Request a quote
Send us the OE number, the quantity you need and your destination port, and we will come back with price, MOQ and lead time. If you are sourcing a range of wiper linkages rather than a single part, ask for our full cross-reference list — we cover VW, Audi, Seat, Skoda, Ford, Toyota, Honda, Hyundai, Nissan and Opel applications.
Supplied factory-direct — see MOQ, lead time and OEM packaging. For the theory behind the part: how a wiper linkage works.
Related wiper linkages and vehicle series
This VW Lavida 2018 assembly is part of our VW Series wiper linkages range. Also stocked in the same series: VW Touareg 2005-2014 wiper linkage (7L0955601C) and VW Sharan 1995-2010 wiper linkage (7M1955603). For fitment guidance and fault diagnosis, see the complete wiper linkage replacement guide. Every assembly ships with its OE cross-reference, so you can order by the number stamped on the old unit.






Reviews
There are no reviews yet.