76530-SAA-G01 Wiper Linkage for Honda Fit Hatchback 2002-2008

Brand-new OE-quality wiper linkage assembly for Honda Fit Hatchback 2002-2008 (replaces OE 76530-SAA-G01). Supplied complete with links, pivots and crank arm, and it bolts onto the factory mounting points using the original wiper motor. Factory-direct wholesale supply for importers and distributors — MOQ 10 pcs.

Description

This wiper linkage is a direct bolt-on replacement for the Honda Fit Hatchback (2002-2008). It carries OE reference 76530-SAA-G01 and mounts to the original fixing points, so no drilling or adapter plates are needed.

Most failures on this type of assembly start at the pivots: the bushings dry out, water works into the joint and the pin starts to seize. The symptom shows up first as a smeared arc at the edge of the screen.

Vehicles this wiper linkage fits

Make / model Model years
Honda Fit Hatchback 2002-2008

Replaces OE number: 76530-SAA-G01. If the number on your old linkage matches, this is the correct replacement.

Why the original part fails

The failure mode is predictable — a binding pivot, a rusty rod end or cracked plastic bushing. Replacing the whole assembly is normally quicker and safer than pressing in new bushings on a scored pin.

  • POM bushings, DuPont grade — The original soft bushings wear oval and let the pivot move off-centre. A harder, dimensionally stable bushing keeps the clearance the linkage was designed with.
  • Brass bearings at the pivot pins — Carries the load at the point where the factory part scores, so service life is not limited by a single wear surface.
  • Aluminium pivot arms — Adds stiffness to the linkage under load — this is what stops the assembly flexing and skipping.
  • Galvanised and coated steel — Water from the windscreen drains straight over this area. Coated rods and brackets resist rust and seizing in wet climates.
  • Pre-greased on assembly — The unit goes in ready to run, so there is no extra greasing step during fitting.

Specification

OE number 76530-SAA-G01
Vehicle Honda Fit Hatchback (2002-2008)
Bushings POM (DuPont grade) with brass bearings
Pivot arms Aluminium, re-engineered design
Finish Galvanised and coated, anti-rust
Mounting Direct bolt-on to original points
Greasing Pre-greased at assembly
Testing 100% inspected before shipment
Packing Neutral carton or customer-branded
Warranty 12 months

Frequently asked questions

What is the usual lead time?

Lead time depends on quantity and whether you need neutral or branded packing. Send us the quantity and your destination port and we will confirm the schedule in the quotation.

Do you cover other models from the same platform?

Very often yes — several vehicles share the same linkage. If you tell us the models you buy for, we will check the full cross-reference and bundle them into one shipment.

How do I confirm this Honda Fit Hatchback linkage is the right part?

Match the OE reference 76530-SAA-G01 against the number stamped or printed on your original linkage. If your part carries a superseded number, send us a photo of it and we will confirm the match before you order.

Request a quote

Send us the OE number, the quantity you need and your destination port, and we will come back with price, MOQ and lead time. If you are sourcing a range of wiper linkages rather than a single part, ask for our full cross-reference list — we cover VW, Audi, Seat, Skoda, Ford, Toyota, Honda, Hyundai, Nissan and Opel applications.

Related wiper linkages and vehicle series

This Honda Fit Hatchback 2002-2008 assembly is part of our Honda Series wiper linkages range. Also stocked in the same series: Honda Accord 1998-2002 wiper linkage (76530-S84-A01) and Honda Accord 2003-2007 wiper linkage (76530-SDA-A01). For fitment guidance and fault diagnosis, see how to replace a wiper linkage. Every assembly ships with its OE cross-reference, so you can order by the number stamped on the old unit.

Additional information

Position

Front

Material

Aluminium + POM bushings

Warranty:

12 months

Minimum Order Quantity:

10 pcs

Packaging Details:

Carton of 10-20 pcs depending on size

Delivery Time:

7-30 days

Payment Terms:

T/T 30% deposit, balance before shipment

Place of Origin:

Made in China

Model Number:

76530-SAA-G01, 76530SAAG01

Reference Number

OEM Number 1: 76530-SAA-G01
OEM Number 2: 76530SAAG01

 

Vehicle List

Honda Fit Hatchback
Year Engine Liter Fuel Fitment notes
2002
2003
2004
2005
2006
2007
2008

FAQ

Fente Auto Parts offers the windshield wiper parts matches the fit and function of the original equipment on specified vehicles WINDOW WIPER SYSTEM from which ensures quality. The wiper linkages we supply are of the high quality, so you can be sure that they’ll be up to the job of making your wiper blades work in sync.

Our experienced sale and technical staff to contact you at the earliest possible time to confirm the relevant data of the product. They will be able to direct you to the correct part for your vehicle.

Yes, you can easily track your orders with FenTe Auto Parts. We have a professional staff for each customer to follow up on your order. You can contact him at any time to know the progress of the order.

Our team have specialist knowledge and can assist customers with their enquiries. And huge savings against main dealer prices. We offer WINDOW WIPER SYSTEM by at nation-wide best prices.

In case your desired product is no stocks then we’ll arrange the product directly from our factory. And we will also inform you with an ETA.

Reviews

There are no reviews yet.

Be the first to review “76530-SAA-G01 Wiper Linkage for Honda Fit Hatchback 2002-2008”

Your email address will not be published. Required fields are marked *

14 + nine =

SKU FT-H-007 Category Tags , ,

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@fengteautoparts.com”.