76530-T2F-A01 Wiper Linkage for Honda Accord 2014-2017

Brand-new OE-quality wiper linkage assembly for Honda Accord 2014-2017 (replaces OE 76530-T2F-A01). Supplied complete with links, pivots and crank arm, and it bolts onto the factory mounting points using the original wiper motor. Factory-direct wholesale supply for importers and distributors — MOQ 10 pcs.

Description

Direct-fit wiper linkage for the Honda Accord (2014-2017), replacing OE 76530-T2F-A01. The assembly arrives pre-greased and aligned, so fitting is a straightforward remove-and-refit job.

Made by Ruian Fente Auto Parts in Zhejiang, China — we have run our own wiper-linkage line since 2012, so this reference is current production rather than old stock.

On a high-mileage vehicle the linkage outlives the bushings inside it. Once a pivot stiffens, every sweep pulls harder on the motor, and the wiper arm timing drifts out of position.

Vehicles this wiper linkage fits

Make / model Model years
Honda Accord 2014-2017

Replaces OE number: 76530-T2F-A01. If the number on your old linkage matches, this is the correct replacement.

Accord 2014-2017: what fails and why

On this generation of Accord the linkage is a light pressed assembly with plastic bushes at the pivot balls. The bush is the designed wear item: it cracks, the link pops off the ball and one arm stops dead while the motor keeps running happily. That is why the usual complaint is “one wiper stopped, no noise, no warning”.

  • Link pops off the pivot ball. A cracked bush lets the socket spread. Refitting the link is a roadside fix that fails again within weeks — the socket has already lost its grip.
  • Spindles seize in the cowl bearings. Water sits in the cowl drains and the spindle bearing dries out, so the motor starts working against a stiff joint.
  • Arms are splined and tight. They are not meant to be levered. Use a puller, or the spindle and the arm both suffer.
  • The motor is untouched. This listing is the rod-and-pivot assembly; the motor, its plug and its mounting stay on the car.

Confirm the part in four steps

Check What to look for
OE number 76530-T2F-A01 on the old assembly — also listed as 76530T2FA01
Model year 2014-2017 Accord. Earlier and later generations use a different linkage and a different motor coupling
Failure pattern If one link has already popped off its ball, the bush is cracked — replacing the link alone will not hold
Motor plug Leave the motor and its connector in place; only the linkage and crank transfer

Why the original part fails

Uneven wiping, a blade that lags on one side, or a knock on every pass usually traces back to worn pivots rather than the motor. If the linkage is left in place, the extra load is passed on to the motor and gearbox.

  • POM (acetal) bushings — The original soft bushings wear oval and let the pivot move off-centre. A harder, dimensionally stable bushing keeps the clearance the linkage was designed with.
  • Brass bearings at the pivot pins — Carries the load at the point where the factory part scores, so service life is not limited by a single wear surface.
  • Aluminium pivot arms — Adds stiffness to the linkage under load — this is what stops the assembly flexing and skipping.
  • Galvanised and coated steel — Water from the windscreen drains straight over this area. Coated rods and brackets resist rust and seizing in wet climates.
  • Pre-greased on assembly — The unit goes in ready to run, so there is no extra greasing step during fitting.

Specification

OE number 76530-T2F-A01
Vehicle Honda Accord (2014-2017)
Bushings POM (acetal) bushings with brass bearings
Pivot arms Aluminium pivot arms
Finish Galvanised and coated, anti-rust
Mounting Direct bolt-on to original points
Greasing Pre-greased at assembly
Testing Batch inspected for pivot play and sweep before packing
Packing Neutral carton, 10-20 pcs per carton, or customer-branded
Warranty 12 months

Symptom to cause

Symptom on the car What is worn Does this part fix it?
One arm stopped, motor still runs Cracked pivot bush, link off the ball Yes — new bushes and links
Both arms slow or stall in cold weather Seized spindle bearings or a tired motor Only if the bearings are the cause
Clunk at the base of the screen Worn pivot socket Yes
Arm strikes the A-pillar trim Crank fitted one position out Yes, once the crank is re-timed

Fitting sequence

  1. Battery off. Tape-mark both arms where they currently park.
  2. Remove the arm caps and nuts, then draw both arms with a puller.
  3. Take out the cowl cover and the wiper well trim to reach the linkage bracket.
  4. Unbolt the bracket, disconnect the link from the motor crank and lift the assembly out.
  5. Fit the new assembly, reconnect the crank, and tighten the bracket so the pivots sit flat.
  6. Refit the arms to the marks, cycle the wipers, and adjust the park position if the arms sit high.

Photographic walk-through: replacing a wiper linkage.

Frequently asked questions

Is the wiper motor included in this listing?

This listing covers the linkage itself. If you need the linkage-with-motor version for this vehicle, send the OE number and we will quote it separately.

Can you supply this in bulk for distribution?

Yes. This is a volume part for the aftermarket and we supply importers, distributors and workshop chains. Sample orders ship within 7 days; production runs follow at the standard 7-30 day lead time.

What is the usual lead time?

Lead time depends on quantity and whether you need neutral or branded packing. Send us the quantity and your destination port and we will confirm the schedule in the quotation.

Does the kit include the link that keeps popping off?

The assembly arrives complete — rods, pivot sockets, bushes and bracket. There is no separate repair kit to buy, which is the point: a bush that has already spread will not hold a new link.

Will it fit a 2013 or a 2018 Accord?

No. This reference covers 2014-2017 only. The linkage and motor coupling changed either side of that range, so send the year and we will quote the correct number.

Request a quote

Send us the OE number, the quantity you need and your destination port, and we will come back with price, MOQ and lead time. If you are sourcing a range rather than a single part, ask for the full cross-reference list — our catalogues are grouped into nine vehicle series (VW, Korea, American, Toyota, Honda, Nissan, Jeep/Mitsubishi/Subaru, Peugeot/Renault and Mazda), and one enquiry can cover several of them.

Made on our own line in Zhejiang and shipped factory-direct — details of MOQ, lead time and OEM packaging. If you are diagnosing rather than replacing, start with how the linkage mechanism works.

Related wiper linkages and vehicle series

This Honda Accord 2014-2017 assembly is part of our Honda Series wiper linkages range. Also stocked in the same series: Honda Accord 1998-2002 wiper linkage (76530-S84-A01) and Honda Accord 2003-2007 wiper linkage (76530-SDA-A01). For fitment guidance and fault diagnosis, see how to replace a wiper linkage. Every assembly ships with its OE cross-reference, so you can order by the number stamped on the old unit.

Additional information

Position

Front

Material

Aluminium + POM bushings

Warranty:

12 months

Minimum Order Quantity:

10 pcs

Packaging Details:

Carton of 10-20 pcs depending on size

Delivery Time:

7-30 days

Payment Terms:

T/T 30% deposit, balance before shipment

Place of Origin:

Made in China

Model Number:

602-953, 76530-T2F-A01, 76530T2FA01

Reference Number

OEM Number 1: 76530-T2F-A01
OEM Number 2: 76530T2FA01
Dorman Number: 602-953

 

Vehicle List

Honda Accord
Year Engine Liter Fuel Fitment notes
2014 4 2 ELECTRIC/GAS
2015 4 2 ELECTRIC/GAS
2017 4 2 ELECTRIC/GAS
2013 4 2.4 GAS
2014 4 2.4 GAS
2015 4 2.4 GAS
2016 4 2.4 GAS
2017 4 2.4 GAS
2013 6 3.5 GAS
2014 6 3.5 GAS
2015 6 3.5 GAS
2016 6 3.5 GAS
2017 6 3.5 GAS

FAQ

Fente Auto Parts offers the windshield wiper parts matches the fit and function of the original equipment on specified vehicles WINDOW WIPER SYSTEM from which ensures quality. The wiper linkages we supply are of the high quality, so you can be sure that they’ll be up to the job of making your wiper blades work in sync.

Our experienced sale and technical staff to contact you at the earliest possible time to confirm the relevant data of the product. They will be able to direct you to the correct part for your vehicle.

Yes, you can easily track your orders with FenTe Auto Parts. We have a professional staff for each customer to follow up on your order. You can contact him at any time to know the progress of the order.

Our team have specialist knowledge and can assist customers with their enquiries. And huge savings against main dealer prices. We offer WINDOW WIPER SYSTEM by at nation-wide best prices.

In case your desired product is no stocks then we’ll arrange the product directly from our factory. And we will also inform you with an ETA.

Reviews

There are no reviews yet.

Be the first to review “76530-T2F-A01 Wiper Linkage for Honda Accord 2014-2017”

Your email address will not be published. Required fields are marked *

10 + 11 =

SKU FT-H-014 Category Tags , ,

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@fengteautoparts.com”.