Description
This wiper linkage covers the Toyota Camry (2003-2008) and replaces OE 85150-AA030, 85150-AA050, 85110-AA050. Same footprint as the original part, with the pivot design reworked where the factory unit tends to fail.
Uneven wiping, a blade that lags on one side, or a knock on every pass usually traces back to worn pivots rather than the motor. If the linkage is left in place, the extra load is passed on to the motor and gearbox.
Vehicles this wiper linkage fits
| Make / model | Model years |
|---|---|
| Toyota Camry | 2002-2006 |
| Toyota Solara | 2004-2008 |
Replaces OE numbers: 85150-AA030, 85150-AA050, 85110-AA050. If the number on your old linkage matches, this is the correct replacement.
Camry XV30 (2003-2006): the previous generation, and its own part
The XV30 Camry looks similar to the XV40 from the outside, but its linkage is a different assembly with different pivot spacing — one of the most common ordering mistakes on Camrys. This reference covers the 2003-2006 car only.
- Do not cross-order between generations. The XV30 and XV40 linkages do not interchange; check the stamped number.
- Same wear logic as every Camry. High annual mileage means bushes wear at car- fleet speed.
- Gentle cowl trim. The XV30 cowl clips survive removal better than later cars, but mark their positions — they are not symmetrical.
- Motor stays with the car. Rods, pivots and bracket are supplied; the crank transfers from the original motor.
Four checks before ordering
| Check | What to look for |
|---|---|
| OE number | 85150-AA030 on the old assembly — also written 85150AA030 |
| Generation | 2003-2006 XV30, not the 2006-2011 XV40 (85150-06110) |
| Trim layout | Mark cowl clip positions on removal; the panels are not symmetrical |
| Arm marks | Tape both arms; the new assembly has no timing marks |
Why the original part fails
On a high-mileage vehicle the linkage outlives the bushings inside it. Once a pivot stiffens, every sweep pulls harder on the motor, and the wiper arm timing drifts out of position.
- POM bushings, DuPont grade — The original soft bushings wear oval and let the pivot move off-centre. A harder, dimensionally stable bushing keeps the clearance the linkage was designed with.
- Brass bearings at the pivot pins — Carries the load at the point where the factory part scores, so service life is not limited by a single wear surface.
- Aluminium pivot arms — Adds stiffness to the linkage under load — this is what stops the assembly flexing and skipping.
- Galvanised and coated steel — Water from the windscreen drains straight over this area. Coated rods and brackets resist rust and seizing in wet climates.
- Pre-greased on assembly — The unit goes in ready to run, so there is no extra greasing step during fitting.
Specification
| OE number | 85150-AA030, 85150-AA050, 85110-AA050 |
|---|---|
| Vehicle | Toyota Camry (2003-2008) |
| Bushings | POM (DuPont grade) with brass bearings |
| Pivot arms | Aluminium, re-engineered design |
| Finish | Galvanised and coated, anti-rust |
| Mounting | Direct bolt-on to original points |
| Greasing | Pre-greased at assembly |
| Testing | 100% inspected before shipment |
| Packing | Neutral carton or customer-branded |
| Warranty | 12 months |
What this part fixes
| Symptom on the car | What is worn | Does this part fix it? |
|---|---|---|
| One arm shorter sweep | Worn pivot bush | Yes |
| Scuttle knock per stroke | Pivot pin play | Yes |
| Heavy wipers in the cold | Stiff joints | Yes, motor permitting |
| Streaks only | Blades | No |
Fitting sequence
- Battery disconnected; arms taped at park.
- Arm caps and nuts off; arms drawn with a puller.
- Cowl panels lifted in marked order; clips kept.
- Bracket unbolted; assembly out; crank transferred.
- New assembly seated; bracket tightened evenly.
- Arms refitted to the marks; cycle tested; park adjusted if needed.
Photographic walk-through: replacing a wiper linkage.
Frequently asked questions
Do you cover other models from the same platform?
Very often yes — several vehicles share the same linkage. If you tell us the models you buy for, we will check the full cross-reference and bundle them into one shipment.
How do I confirm this Toyota Camry linkage is the right part?
Match the OE reference 85150-AA030, 85150-AA050, 85110-AA050 against the number stamped or printed on your original linkage. If your part carries a superseded number, send us a photo of it and we will confirm the match before you order.
Is the wiper motor included in this listing?
This listing covers the linkage itself. Several of our linkages are also available as a linkage-with-motor assembly — tell us the vehicle and we will quote both options.
How do I tell an XV30 from an XV40 Camry?
By year first — 2003-2006 is XV30, 2006-2011 is XV40 — and then by the number stamped on the old linkage: 85150-AA030 versus 85150-06110.
Is this still manufactured?
Yes, on our current line. Bushings and rods are current specification, and repeat orders match previous batches.
Request a quote
Send us the OE number, the quantity you need and your destination port, and we will come back with price, MOQ and lead time. If you are sourcing a range of wiper linkages rather than a single part, ask for our full cross-reference list — we cover VW, Audi, Seat, Skoda, Ford, Toyota, Honda, Hyundai, Nissan and Opel applications.
Factory-direct with OE cross-referencing — see MOQ and lead times. For the mechanism: how a wiper linkage works.
Related wiper linkages and vehicle series
This Toyota Camry 2003-2008 assembly is part of our Toyota Series wiper linkages range. Also stocked in the same series: Toyota Tacoma 1996-2004 wiper linkage (85150-04020) and Toyota Paseo 1996-1999 wiper linkage (85150-16520). For fitment guidance and fault diagnosis, see how a wiper linkage works. Every assembly ships with its OE cross-reference, so you can order by the number stamped on the old unit.








Reviews
There are no reviews yet.