76530-S5A-A01 Wiper Linkage for Honda Civic 2001-2005

Brand-new OE-quality wiper linkage assembly for Honda Civic 2001-2005 (replaces OE 76530-S5A-A01). Supplied complete with links, pivots and crank arm, and it bolts onto the factory mounting points using the original wiper motor. Factory-direct wholesale supply for importers and distributors — MOQ 10 pcs.

Description

This wiper linkage covers the Honda Civic (2001-2005) and replaces OE 76530-S5A-A01. Same footprint as the original part, with the pivot design reworked where the factory unit tends to fail.

On a high-mileage vehicle the linkage outlives the bushings inside it. Once a pivot stiffens, every sweep pulls harder on the motor, and the wiper arm timing drifts out of position.

Vehicles this wiper linkage fits

Make / model Model years
Honda Civic 2001-2005

Replaces OE number: 76530-S5A-A01. If the number on your old linkage matches, this is the correct replacement.

Civic 2001-2005: what fails on a twenty-year-old linkage

The seventh-generation Civic ran from 2001 to 2005 in sedan, coupe and hatch bodies, and by now every one of these linkages is well past its design life. The assembly itself is simple — a three-pivot layout driven by a short crank — which is why the car usually announces the failure clearly: one arm stops while the motor keeps running.

  • The bushings are the wear item. Honda rated the original nylon bushes for roughly a decade of service. At twenty years they are cracked or oval, and the joint develops play long before the arm stops completely.
  • Arms seize on the splines. Two decades of corrosion welds the arm to the spindle. A wiper-arm puller is mandatory; levering with a screwdriver usually cracks the cowl grille.
  • Cowl clips are brittle. The plastic clips along the cowl panel break on removal at this age. Order a spare clip set with the linkage.
  • The motor stays on the car. This listing is the rod-and-pivot assembly; the motor, its crank and connector transfer from the original unit.

Confirm the reference before ordering

Check What to look for
OE number 76530-S5A-A01 or 76530-S5A-A02 on the old assembly — also written 76530S5AA01 / 76530S5AA02 without hyphens
Suffix Both -A01 and -A02 suffixes appear on this generation. Order the number printed on your old unit; if it is unreadable, send a photo and the build date
Body style Sedan, coupe and hatch share this reference in our catalog, but confirm the year and body from the plate before committing stock
Arm position Tape-mark both arms at their park position before removal; the new linkage carries no timing marks

Why the original part fails

Uneven wiping, a blade that lags on one side, or a knock on every pass usually traces back to worn pivots rather than the motor. If the linkage is left in place, the extra load is passed on to the motor and gearbox.

  • POM bushings, DuPont grade — The original soft bushings wear oval and let the pivot move off-centre. A harder, dimensionally stable bushing keeps the clearance the linkage was designed with.
  • Brass bearings at the pivot pins — Carries the load at the point where the factory part scores, so service life is not limited by a single wear surface.
  • Aluminium pivot arms — Adds stiffness to the linkage under load — this is what stops the assembly flexing and skipping.
  • Galvanised and coated steel — Water from the windscreen drains straight over this area. Coated rods and brackets resist rust and seizing in wet climates.
  • Pre-greased on assembly — The unit goes in ready to run, so there is no extra greasing step during fitting.

Specification

OE number 76530-S5A-A01
Vehicle Honda Civic (2001-2005)
Bushings POM (DuPont grade) with brass bearings
Pivot arms Aluminium, re-engineered design
Finish Galvanised and coated, anti-rust
Mounting Direct bolt-on to original points
Greasing Pre-greased at assembly
Testing 100% inspected before shipment
Packing Neutral carton or customer-branded
Warranty 12 months

Symptom to cause on this generation

Symptom on the car What is worn Does this part fix it?
One arm stops, motor still runs Cracked bushing, link off the ball Yes — new bushes and links throughout
Knock from the cowl on every stroke Oval bushing in one pivot Yes
Arms park above the black band Crank slipped on the motor shaft Only if the crank is re-timed during fitting
Blade chatters, arc is even Blade rubber or arm spring No — that is an arm or blade fault

Fitting sequence

  1. Disconnect the battery and tape-mark the park position of both arms on the glass.
  2. Prise up the arm caps, undo the nuts and draw both arms with a puller — expect them to be tight.
  3. Release the cowl clips and lift the panel clear; replace any broken clips rather than reusing them.
  4. Unbolt the linkage bracket, lift the assembly out and separate the link from the motor crank.
  5. Seat the new assembly, reconnect the crank and tighten the bracket evenly.
  6. Refit the arms to the tape marks, run a full cycle and correct the park position one spline tooth at a time if needed.

Full walk-through with photographs: how to replace a wiper linkage on your car.

Frequently asked questions

Is the wiper motor included in this listing?

This listing covers the linkage itself. Several of our linkages are also available as a linkage-with-motor assembly — tell us the vehicle and we will quote both options.

Can you supply this in bulk for distribution?

Yes. This is a volume part for the aftermarket and we supply importers, distributors and workshop chains with mixed container loads. Urgent orders are accepted and samples can be arranged.

What is the usual lead time?

Lead time depends on quantity and whether you need neutral or branded packing. Send us the quantity and your destination port and we will confirm the schedule in the quotation.

Does it matter whether my Civic is a sedan or a coupe?

In our catalog the 2001-2005 Civic bodies share the 76530-S5A reference, but we still confirm every order against the year and body on the vehicle plate or a photo of the old assembly before shipping.

Are the -A01 and -A02 suffixes interchangeable?

Both suffixes appear on this generation. We supply against the exact number you order, so use the one stamped on your old unit — if it is illegible, send the build date and a photo and we will confirm which suffix applies before dispatch.

Request a quote

Send us the OE number, the quantity you need and your destination port, and we will come back with price, MOQ and lead time. If you are sourcing a range of wiper linkages rather than a single part, ask for our full cross-reference list — we cover VW, Audi, Seat, Skoda, Ford, Toyota, Honda, Hyundai, Nissan and Opel applications.

Supplied factory-direct from our own wiper linkage line — see how we handle OE cross-referencing and OEM packaging. For the theory behind the rods and pivots, read how a wiper linkage works.

Related wiper linkages and vehicle series

This Honda Civic 2001-2005 assembly is part of our Honda Series wiper linkages range. Also stocked in the same series: Honda Accord 1998-2002 wiper linkage (76530-S84-A01) and Honda Accord 2003-2007 wiper linkage (76530-SDA-A01). For fitment guidance and fault diagnosis, see how to replace a wiper linkage. Every assembly ships with its OE cross-reference, so you can order by the number stamped on the old unit.

Additional information

Position

Front

Material

Aluminium + POM bushings

Warranty:

12 months

Minimum Order Quantity:

10 pcs

Packaging Details:

Carton of 10-20 pcs depending on size

Delivery Time:

7-30 days

Payment Terms:

T/T 30% deposit, balance before shipment

Place of Origin:

Made in China

Model Number:

602-509, 76530-S5A-A01, 76530-S5A-A02, 76530S5AA01, 76530S5AA02

Reference Number

OEM Number 1: 76530-S5A-A01
OEM Number 2: 76530-S5A-A02
OEM Number 3: 76530S5AA01
OEM Number 4: 76530S5AA02
Dorman Number: 602-509

 

Vehicle List

Honda Civic
Year Engine Liter Fuel Fitment notes
2001 4 1.7 GAS 2 Doors Coupe
2002 4 1.7 GAS 2 Doors Coupe
2003 4 1.7 GAS 2 Doors Coupe
2004 4 1.7 GAS 2 Doors Coupe
2005 4 1.7 GAS 2 Doors Coupe

 

FAQ

Fente Auto Parts offers the windshield wiper parts matches the fit and function of the original equipment on specified vehicles WINDOW WIPER SYSTEM from which ensures quality. The wiper linkages we supply are of the high quality, so you can be sure that they’ll be up to the job of making your wiper blades work in sync.

Our experienced sale and technical staff to contact you at the earliest possible time to confirm the relevant data of the product. They will be able to direct you to the correct part for your vehicle.

Yes, you can easily track your orders with FenTe Auto Parts. We have a professional staff for each customer to follow up on your order. You can contact him at any time to know the progress of the order.

Our team have specialist knowledge and can assist customers with their enquiries. And huge savings against main dealer prices. We offer WINDOW WIPER SYSTEM by at nation-wide best prices.

In case your desired product is no stocks then we’ll arrange the product directly from our factory. And we will also inform you with an ETA.

Reviews

There are no reviews yet.

Be the first to review “76530-S5A-A01 Wiper Linkage for Honda Civic 2001-2005”

Your email address will not be published. Required fields are marked *

three × one =

SKU FT-H-003 Category Tags , ,

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@fengteautoparts.com”.