85150-B2090 Windshield Wiper Linkage for Toyota Corolla 2003-2008

Brand-new OE-quality wiper linkage assembly for Toyota Corolla 2003-2008 (replaces OE 85150-B2090). Supplied complete with links, pivots and crank arm, and it bolts onto the factory mounting points using the original wiper motor. Factory-direct wholesale supply for importers and distributors — MOQ 10 pcs.

Description

This wiper linkage is a direct bolt-on replacement for the Toyota Corolla (2003-2008). It carries OE reference 85150-B2090 and mounts to the original fixing points, so no drilling or adapter plates are needed.

Uneven wiping, a blade that lags on one side, or a knock on every pass usually traces back to worn pivots rather than the motor. If the linkage is left in place, the extra load is passed on to the motor and gearbox.

Vehicles this wiper linkage fits

Make / model Model years
Toyota Corolla 2003-2008

Replaces OE number: 85150-B2090. If the number on your old linkage matches, this is the correct replacement.

Corolla 2003-2008 (85150-B2090): the volume Corolla linkage

This reference covers the high-volume Corolla generation that ran across Asia, the Middle East and Australasia. Because the car was everywhere, the linkage is one of our steady production items — and because these cars run long past their first decade, the linkage is usually a wear replacement, not an accident part.

  • High mileage equals worn bushes. Most of these cars are on their second or third linkage by now.
  • Dusty-market cars fail earliest. Grit past the cowl seal grinds the pivots; clear the drain and seals while the assembly is out.
  • Two Corolla references share this era. Confirm against the stamped number — see the FAQ.
  • Motor and crank reused. Assembly ships as rods, pivots and bracket.

Ordering checks

Check What to look for
OE number 85150-B2090 on the old assembly — also 85150B2090
Which Corolla This era has sibling references (see 85150-1A030); the stamped number decides
Market Australasian and Gulf-market cars share this reference; confirm with a photo if unsure
Arm marks Tape the arms before removal

Why the original part fails

On a high-mileage vehicle the linkage outlives the bushings inside it. Once a pivot stiffens, every sweep pulls harder on the motor, and the wiper arm timing drifts out of position.

  • POM bushings, DuPont grade — The original soft bushings wear oval and let the pivot move off-centre. A harder, dimensionally stable bushing keeps the clearance the linkage was designed with.
  • Brass bearings at the pivot pins — Carries the load at the point where the factory part scores, so service life is not limited by a single wear surface.
  • Aluminium pivot arms — Adds stiffness to the linkage under load — this is what stops the assembly flexing and skipping.
  • Galvanised and coated steel — Water from the windscreen drains straight over this area. Coated rods and brackets resist rust and seizing in wet climates.
  • Pre-greased on assembly — The unit goes in ready to run, so there is no extra greasing step during fitting.

Specification

OE number 85150-B2090
Vehicle Toyota Corolla (2003-2008)
Bushings POM (DuPont grade) with brass bearings
Pivot arms Aluminium, re-engineered design
Finish Galvanised and coated, anti-rust
Mounting Direct bolt-on to original points
Greasing Pre-greased at assembly
Testing 100% inspected before shipment
Packing Neutral carton or customer-branded
Warranty 12 months

Symptom to cause

Symptom on the car What is worn Does this part fix it?
Arms out of step Oval bush Yes
Knock on reversal Pivot pin play Yes
Slow sweep under rain load Gritty pivots loading the motor Yes
Streaks with even arc Blades No

Installation outline

  1. Battery off; arms marked at park.
  2. Arm caps and nuts off; arms pulled with a puller.
  3. Cowl trim removed; check the drain and seals while open.
  4. Bracket unbolted; assembly out; crank transferred from the motor.
  5. New assembly seated; bracket bolts evened.
  6. Arms to the marks; cycle tested; park corrected if needed.

Full procedure: how to replace a wiper linkage on your car.

Frequently asked questions

How do I confirm this Toyota Corolla linkage is the right part?

Match the OE reference 85150-B2090 against the number stamped or printed on your original linkage. If your part carries a superseded number, send us a photo of it and we will confirm the match before you order.

Is the wiper motor included in this listing?

This listing covers the linkage itself. Several of our linkages are also available as a linkage-with-motor assembly — tell us the vehicle and we will quote both options.

Can you supply this in bulk for distribution?

Yes. This is a volume part for the aftermarket and we supply importers, distributors and workshop chains with mixed container loads. Urgent orders are accepted and samples can be arranged.

There are two Corolla references for this era — which is mine?

The stamped number on the old assembly is the only reliable key: 85150-B2090 or 85150-1A030. Send a photo of the stamping if the number is worn away.

Is a 20-year-old Corolla worth a new linkage?

For markets where these cars are still daily transport, yes — that is exactly why we keep the reference in production.

Request a quote

Send us the OE number, the quantity you need and your destination port, and we will come back with price, MOQ and lead time. If you are sourcing a range of wiper linkages rather than a single part, ask for our full cross-reference list — we cover VW, Audi, Seat, Skoda, Ford, Toyota, Honda, Hyundai, Nissan and Opel applications.

Produced on our own line, OE cross-referenced — see distributor terms. Mechanism background: how a wiper linkage works.

Related wiper linkages and vehicle series

This Toyota Corolla 2003-2008 assembly is part of our Toyota Series wiper linkages range. Also stocked in the same series: Toyota Tacoma 1996-2004 wiper linkage (85150-04020) and Toyota Paseo 1996-1999 wiper linkage (85150-16520). For fitment guidance and fault diagnosis, see how a wiper linkage works. Every assembly ships with its OE cross-reference, so you can order by the number stamped on the old unit.

Additional information

Position

Front

Material

Aluminium + POM bushings

Warranty:

12 months

Minimum Order Quantity:

10 pcs

Packaging Details:

Carton of 10-20 pcs depending on size

Delivery Time:

7-30 days

Payment Terms:

T/T 30% deposit, balance before shipment

Place of Origin:

Made in China

Model Number:

85150-B2090, 85150B2090

Reviews

There are no reviews yet.

Be the first to review “85150-B2090 Windshield Wiper Linkage for Toyota Corolla 2003-2008”

Your email address will not be published. Required fields are marked *

fourteen − thirteen =

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@fengteautoparts.com”.