S11-5205210 Windshield Wiper Linkage for Daewoo Matiz

Brand-new OE-quality wiper linkage assembly for Daewoo Matiz (replaces OE S11-5205210). Supplied complete with links, pivots and crank arm, and it bolts onto the factory mounting points using the original wiper motor. Factory-direct wholesale supply for importers and distributors — MOQ 10 pcs.

Description

Direct-fit wiper linkage for the Daewoo Matiz, replacing OE S11-5205210. The assembly arrives pre-greased and aligned, so fitting is a straightforward remove-and-refit job.

Uneven wiping, a blade that lags on one side, or a knock on every pass usually traces back to worn pivots rather than the motor. If the linkage is left in place, the extra load is passed on to the motor and gearbox.

Vehicles this wiper linkage fits

Make / model Model years
Daewoo Matiz (M100) –

Replaces OE number: S11-5205210. If the number on your old linkage matches, this is the correct replacement.

Daewoo Matiz (S11): small car, small parts, same physics

The Matiz is one of the smallest cars we supply linkages for, and its assembly is correspondingly compact — short rods, close-set pivots, and light arms. The compact layout hides one trap: because every part is small, a little wear goes a long way. One worn bush produces a visible sweep error on a screen this size.

  • Short rods amplify bush wear. The geometry tolerance is tight, so an ovalled bush shows up quickly as an uneven arc.
  • Light arms mean light loads. The motor rarely fails first on a Matiz — expect the linkage to be the culprit.
  • City parking damage. Tight parking means arms get bent by hand more often than on any other car we catalogue — check the rods are straight before blaming the pivots.
  • Motor transfers across. The assembly is rods, pivots and bracket; the original motor and crank stay on the car.

Confirm before ordering

Check What to look for
OE number S11-5205210 on the old assembly
Rod straightness Roll each rod on a flat surface; a bent rod on a Matiz is usually parking damage, not wear
Model year The S11 platform ran for many years and markets; send the year to confirm
Arm splines Small splines seize — order with a puller in hand, not a lever

Why the original part fails

On a high-mileage vehicle the linkage outlives the bushings inside it. Once a pivot stiffens, every sweep pulls harder on the motor, and the wiper arm timing drifts out of position.

  • POM bushings, DuPont grade — The original soft bushings wear oval and let the pivot move off-centre. A harder, dimensionally stable bushing keeps the clearance the linkage was designed with.
  • Brass bearings at the pivot pins — Carries the load at the point where the factory part scores, so service life is not limited by a single wear surface.
  • Aluminium pivot arms — Adds stiffness to the linkage under load — this is what stops the assembly flexing and skipping.
  • Galvanised and coated steel — Water from the windscreen drains straight over this area. Coated rods and brackets resist rust and seizing in wet climates.
  • Pre-greased on assembly — The unit goes in ready to run, so there is no extra greasing step during fitting.

Specification

OE number S11-5205210
Vehicle Daewoo Matiz
Bushings POM (DuPont grade) with brass bearings
Pivot arms Aluminium, re-engineered design
Finish Galvanised and coated, anti-rust
Mounting Direct bolt-on to original points
Greasing Pre-greased at assembly
Testing 100% inspected before shipment
Packing Neutral carton or customer-branded
Warranty 12 months

Symptoms and causes

Symptom on the car What is worn Does this part fix it?
Wipers sweep out of step Oval bush in one pivot Yes — both pivots new
One arm touched the bonnet or pillar Bent rod from parking damage Yes — the assembly carries straight rods
Rattle at the scuttle Loose pivot pin Yes
Chatter across the screen Blade rubber No — fit blades

Fitting outline

  1. Battery off; arms tape-marked at park.
  2. Small arm nuts removed — use a puller, the splines are fine-pitched.
  3. Cowl cover lifted; access is quick on a car this size.
  4. Bracket unbolted; assembly out, crank transferred from the motor.
  5. New assembly fitted; bracket bolts tightened evenly.
  6. Arms refitted to the marks; full cycle tested and park adjusted.

Step-by-step photographs: how to replace a wiper linkage on your car.

Frequently asked questions

Do you cover other models from the same platform?

Very often yes — several vehicles share the same linkage. If you tell us the models you buy for, we will check the full cross-reference and bundle them into one shipment.

How do I confirm this Daewoo Matiz linkage is the right part?

Match the OE reference S11-5205210 against the number stamped or printed on your original linkage. If your part carries a superseded number, send us a photo of it and we will confirm the match before you order.

Is the wiper motor included in this listing?

This listing covers the linkage itself. Several of our linkages are also available as a linkage-with-motor assembly — tell us the vehicle and we will quote both options.

Is this the linkage for the Chevrolet Spark too?

The Matiz and the Spark (M200-on) are closely related but the references differ by market and year. Send the year and market, or the number stamped on the old unit, and we confirm before quoting.

Why does the whole assembly need changing on such a small car?

The rods, pivots and bracket are matched as one geometry. On a screen this size a re-bushed single pivot never quite restores the sweep, so the assembly is replaced complete.

Request a quote

Send us the OE number, the quantity you need and your destination port, and we will come back with price, MOQ and lead time. If you are sourcing a range of wiper linkages rather than a single part, ask for our full cross-reference list — we cover VW, Audi, Seat, Skoda, Ford, Toyota, Honda, Hyundai, Nissan and Opel applications.

Produced on our own line and cross-referenced to the OE number — see our distributor terms. For how the mechanism works, read the wiper linkage guide.

Related wiper linkages and vehicle series

This Daewoo Matiz assembly is part of our Korea Series wiper linkages range. Also stocked in the same series: Daewoo Matiz 1998 wiper linkage (96314776) and Daewoo Matiz (M100) 1998 wiper linkage (96602101). For fitment guidance and fault diagnosis, see diagnosing wiper linkage problems. Every assembly ships with its OE cross-reference, so you can order by the number stamped on the old unit.

Additional information

Position

Front

Material

Aluminium + POM bushings

Warranty:

12 months

Minimum Order Quantity:

10 pcs

Packaging Details:

Carton of 10-20 pcs depending on size

Delivery Time:

7-30 days

Payment Terms:

T/T 30% deposit, balance before shipment

Place of Origin:

Made in China

Model Number:

S11-5205210

SKU FT-K-003 Category Tags , ,

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@fengteautoparts.com”.